TDK Banner


• Built in RS-232/RS-485
• Standard Multi-Drop (RS-485) Slave Interface
• Global Commands for
• Last Setting Memory
• High Resolution 16 bit ADC's & DAC's
• Continuous Encoders for Voltage and Current Adjustment
• Parallel Operation with Active Current Sharing and Current Sum
• Independent Remote ON/OFF and Remote Enable/Disable
• Remote Analog Programming and Monitoring
• Reliable Modular and SMT Design
• 19" Rack mounted
• Optional built-in LXI Compliant LAN interface
• Optional built-in IEEE interface
• Optional built-in Isolated Analog Programming
LabView® Drivers/GUI
• Worldwide Safety Agency Approvals
• CE Mark for LVD and EMC Regulation
• Five Year Warranty

GENH-1U (750W)
GEN-1U (750W/1.5kW)
GEN-1U (2.4kW)
GEN-2U (3.3kW)
GEN-2U (5.0kW)
ESS (10kW/15kW)
EMHP (15kW-90kW)
Genesys™ 3U (10kW/15kW): New 800V - 1500V Models Added (400VAC/480VAC Input), & now with CE and RoHS2 compliance
Click here for PDF Version

TDK Corporation announces the addition of eight new High Voltage models to the TDK-Lambda Genesys 3U AC/DC Programmable Power Supply Series. Added models include 800V, 1000V, 1250V and 1500V with Output power levels of 10kW and 15kW. These High Voltage models address the requirements for applications in the Industrial, Automotive, Alternative Energy, Oil & Gas, Lighting and Semiconductor markets.

Carrying a five-year warranty, the TDK-Lambda Genesys™ High Voltage models have the same front panel features and compact dimensions (3U (133mm) high and 19” (483mm) wide) as the standard 10kW/15kW models (7.5V to 600V). These units can operate in either Constant-Voltage (CV) or Constant-Current (CC) mode and can accept a three-phase AC input of either 400VAC or 480VAC (with standard passive Power Factor Correction).

New High Voltage model features include a wider AC Input voltage range for 400VAC input (342VAC – 440VAC), higher efficiency (> 93%), faster Up/Down-Programming Response Time (17ms/20ms), Output isolation up to 1500V, built-in Isolated J1 Remote Analog 5V/10V Program/Monitor, Two-Wire Parallel current share (for parallel system operation), cooling fan speed control for reduced audible noise and extended fan life and lighter weight (< 70lbs).

As with all of the TDK-Lambda Genesys programmable power supplies, several safety and advanced system configuration features are included.

Safety features included are Safe/Auto Re-Start, Last-Setting Memory and Built-in protective functions. With Safe Start configured, the power supply returns to its last operation settings after a power interruption but with the Output disabled, while with Auto Re-Start, the power supply returns to the last used operation settings after a power interruption. Last Setting Memory retains settings such as the Output voltage/current, Output ON/OFF, OVP/UVL level, Foldback and Start-Up mode at each AC Input turn-off sequence. Built-in protective functions include Over- Voltage Protection (OVP), Under-Voltage-Limit (UVL), FOLDback protection (FOLD) and Over-Temperature Protection (OTP).

Higher power systems can be configured using the Master/Slave “Advanced” Parallel operating mode (utilizing Two-Wire current share). This mode configures the Master unit to be the single –point for programming, measurement and status of the total current of the paralleled system. Thus, four units can operate as a single 40kW or 60kW power supply, increasing the flexibility for system designers.

Common to the entire TDK-Lambda Genesys™ family is the embedded 16-bit RS-232/RS-485 Multi-Drop Digital communication interface. Using this Digital communication interface, up to 31 power supplies may be controlled in an addressed RS-485 daisy-chain configuration.
Other optional Digital and Analog communication interfaces include the LXI Class C compliant LAN and the IEEE (488.2 and SCPI-compliant) Multi-Drop Digital communication interfaces (which include a selection of instrument drivers such as NI LabVIEW and NI LabWindows™) as well as a 4-20mA Isolated Analog programming/monitor interface.

CE marked in accordance with the Low Voltage Directive, the TDK-Lambda Genesys 3U 10kW/15kW Power Supply Series conforms to conducted and radiated EMI in accordance with EN55011A and FCC Part 15J-A.

Safety agency approvals include UL60950-1 and EN60950-1.

For more information about the Genesys 3U AC/DC Programmable Power Supply Series, contact the TDK-Lambda Americas High Power Division directly at +1-732-922-9300 or online at -, contact your local Sales representative ( or download the product datasheet from

A wide range of other TDK-Lambda High Power Division Low Voltage and High Voltage power supplies can be viewed from the website:

Major Applications
Industrial, Automotive, Alternative Energy, Oil & Gas, Lighting and Semiconductor markets including Motor test, EV component test/burn-in, Photovoltaic inverter test, Down-Hole DC power, Lighting systems and Semiconductor component test/burn-in.

Main Features and Benefits
• Wider AC Input Voltage range for 400VAC Input (342VAC – 440VAC).
• Cooling Fan speed control (for reduced audible noise and longer life).
• High Efficiency ( > 93%).
• Fast Up/Down Programming Response Time (17ms / 20ms).
• Output Isolation to 1500V.
• Built-In Isolated J1 Remote Analog 5V/10V Program/Monitor.
• Safe/Auto Re-Start and Last Setting Memory.
• Built-In Protective functions (OVP, UVL, FOLD, OTP, AC-FAIL).
• Two-Wire “Basic” and “Advanced” Parallel current share.
• Built-in RS-232/RS-485 Multi-Drop Digital and Remote Analog Program/Monitor interfaces.
• Optional LAN, GPIB and Isolated-Analog (4-20mA) Programming interfaces.
• Lighter weight (< 70 lbs).


Major Specifications
Parameter   Genesys™ High Current Models
VIN range VAC

Three-Phase 400VAC (342VAC – 440VAC)
Three-Phase 480VAC (432VAC – 528VAC)

VOUT range VDC 0 - 800V 0 - 1000V 0 -1250V 0 - 1500V
Output current range ADC 0 – 12.5 0 - 18.8 0 – 10 0 - 15 0 – 8.0 0 - 12 0 - 6.7 0 - 10
Output power kW 10 15 10 15 10 15 10 15
Efficiency % 93.5%
msec 17msec


msec 20msec
Isolation VDC 1500VDC
Size (H x W x L) mm 5.25”/133mm:(H-3U) x 19.00”/483mm-(W) x 22.85”/581mm:(L)
Weight lbs/kg 70lbs (32kg)
Mounting type   Rack-mount w/ provision for Chassis slides
Warranty yrs 5 years


AC Input
Three phase 400VAC
342-440VAC 47-63 Hz, PF=0.88
Imax=23A (10kW), Imax = 32A (15kW)

Three phase 480VAC
432-528VAC 47-63 Hz, PF=0.88
Imax=20A (10kW), Imax = 27A (15kW)

Output Characteristics
Regulation (Line) - CV:
Line 0.1% VOmax < 30V (CV)
Line 0.01% 30V < VOmax < 600V (CV)
Line 0.05% 600V < VOmax < 1500V (CV)

Regulation (Load) - CV:
Load 0.1% VOmax < 30V (CV)
Load 0.02% 30V < VOmax < 600V (CV)
Load 0.1% 600V < VOmax < 1500V (CV)

Regulation (Line) - CC:
Line 0.1% IOmax > 333A (CC)
Line 0.05% 25A < IOmax < 333A (CC)
Line 0.2% IOmax < 25A (CC)

Regulation (Load) - CC:
Load 0.1% IOmax > 333A (CC)
Load 0.075% 25A < IOmax < 333A (CC)
Line 0.2% IOmax < 25A (CC)


Protective Features
Adjustable OVP, OCP, UVL
Adjustable Current Foldback
Safe/Auto Start
Front Panel Lock
Phase Loss

0-5V, 0-10V User Selectable via DIP-switch
RS-232/RS-485 Standard
Parallel Master/Slave setting reports total current of up to four units connected in parallel

19" W x 3U (5.25") H x 22.85" D


Outline Drawings
Outline Drawing (7.5-20V)
Outline Drawing (25-80V)
Outline Drawing (100-300V)
Outline Drawing (400-600V)
Outline Drawing (800-1500V)

Interface Options
(Factory installed, embedded, one per supply)

• LAN - LXI Certified (Class C)
• IEMD - IEEE Master with Multi-Drop capability
• IS510 - standard; built into J1 connector
• IS420 - 4-20mA

All specifications subject to change without notice.

Standard Model Listing (10kW/15kW)

Model Rated Power
Ripple mV RMS
Noise mV p-p
GEN 800-12.5 10000 0-800 0-12.5 80 700
GEN 1000-10.0 10000 0-1000 0-10.0 100 800
GEN 1250-8.0 10000 0-1250 0-8.0 120 1000
GEN 1500-6.70 10000 0-1500 0-6.7 140 1400
GEN 800-18.8 15000 0-800 0-18.8 80 700
GEN 1000-15.0 15000 0-1000 0-15.0 100 800
GEN 1250-12.0 15000 0-1250 0-12.0 120 1000
GEN 1500-10.0 15000 0-1500 0-10.0 140 1400
Ordering Information
Model Voltage   Current   Factory Options   Input
GEN 1000 - 10 - LAN - 3P400
IEMD 3P480

About TDK Corporation
TDK Corporation is a leading electronics company based in Tokyo, Japan. It was established in 1935 to commercialize ferrite, a key material in electronic and magnetic products. TDK's portfolio includes electronic components, modules and systems* which are marketed under the product brands TDK and EPCOS, power supplies, magnetic application products as well as energy devices, flash memory application devices, and others. TDK focuses on demanding markets in the areas of information and communication technology and consumer, automotive and industrial electronics. The company has a network of design and manufacturing locations and sales offices in Asia, Europe, and in North and South America. In fiscal 2014, TDK posted total sales of USD 9.6 billion and employed about 83,000 people worldwide.

* The product portfolio includes ceramic, aluminum electrolytic and film capacitors, ferrites, inductors, high-frequency components such as surface acoustic wave (SAW) filter products and modules, piezo and protection components, and sensors.

About TDK-Lambda Corporation
TDK-Lambda Corporation, a group company of TDK Corporation, is a leading global power supply company providing highly reliable power supplies for industrial equipment worldwide. TDK-Lambda Corporation meets the various needs of customers with our entire range of activities, from research and development through to manufacturing, sales, and service with bases in five key areas, covering Japan, Europe, America, China, and Asia.

For more details, please pay a visit to

Contacts for Regional Media

Region Contact Phone Mail
Americas Tom Goodman - TDK-Lambda Americas +1 732 922 9300
© Copyright 1999-2017 TDK-Lambda Americas Inc. All rights reserved. Legal Information