New 1600 Watt Front-End Power Supplies for Hot-Plug and Redundant Power Systems
San Diego, CA - TDK-Lambda has launched a new line 1600W front-end power supplies for use in distributed, hot-pluggable and redundant power
systems. The HFE1600 series operate off a universal AC input of from 85 to 265VAC, with active PFC, and provides a well regulated DC output of 12V,
24V or 48V. Operating efficiencies of up to 92% are typical. With the 19-inch rack-mount enclosure as many as five (5) supplies can be paralleled
with automatic load-sharing to provide up to 7600W of output power. A popular option is an integral MCU in each supply that allows for remote
programming, monitoring and status reporting via an isolated I2C and PMBus interface. And, an "energy-saving" feature of the I2C/PMBus interface is
that rack-mounted HFE1600 supplies can be individually turned on or off as the total system load demand varies over time (aka "load-shedding").
Key applications for the HFE1600 series include data centers, wireless base stations, industrial automation, telecommunications, RF power amplifiers,
network equipment, storage systems and distributed power architectures.
The HFE1600 supplies, each measuring only 1.61"H x 3.35"W x 11.8"L, can be used individually or as many as five (5) can be mounted in an 1U-high
19-inch rack enclosure to form a paralleled connected, load-sharing, hot-swap, N + M redundant 7.6kW power system. Should a fault occur each
supply has an internal ORing MOSFET switch that will automatically disconnect it from the load and the other paralleled supplies. Plus, alarm signals
and LED indicators are provided to identify a faulty unit. For added power, up to two (2) rack-mounted enclosures can be parallel or series
When employing the HFE600-S1U rack-mount enclosure the DC outputs and current-share lines of each plugged-in HFE1600 supply are automatically
connected in parallel with the others. In this way, scalable and expandable power is easily achieved, even in the field. The rack assembly includes
two sets of output bus bars, each of which are rated at 200 amps, for a total of 400 amps per rack.
And, for higher power applications, up to two (2) power racks containing up to ten (10) model HFE1600 supplies can be zero-stacked (no space
required between racks) and connected in "parallel" to provide up to 15.2kW of total output power in a compact 2U vertical space. Likewise, up to two
(2) rack-mounted sets with five (5) units each can be connected in "series" for higher voltage requirements at up to 15.2kW.
Each HFE1600 supply has two variable-speed cooling fans and can operate in
temperatures ranging from -10°C to 70°C. The airflow is
directed from the front of each unit to the rear where the I/O connector is located.
For system monitoring, in addition to the optional I2C/PMBus interface, opto-isolated signals are provided including DC-OK, AC-Fail and
Over-Temperature. Front-panel mounted LED indicators provide a visual status for DC-OK and AC-OK conditions. A remote On/Off control is also
standard, as well as remote-sense to compensate for voltage drops in the cables that connect the supply outputs to the load. Other standard features
include single wire current-share and an auxiliary 12V/0.5A output that is diode ORed. Remote programming of the output voltage and current can be
accomplished via the I2C and PMBus interface, or with an external 0-5V signal or a 1k ohm potentiometer.
The 19-inch rack mount enclosure is available with AC inlets via IEC320-C16 connectors or terminal blocks for each of the five (5) power module
slots. All units in the HFE1600 Series are fully RoHS-compliant, carry the CE mark and meet UL/EN60950-1 safety specifications, as well as EN55022
and FCC level B EMC conducted specifications. The radiated EMC performance complies with Level A requirements.
The HFE1600 power supplies are available now and priced from $515.00 each in quantities of 500 units. For more information call TDK-Lambda Americas
at 1-800-LAMBDA-4 or download the product datasheets from:
TDK-Lambda is a subsidiary of the TDK Corporation, a leading global electronics company and has been a major provider of power solutions for over 60
years. The company designs and manufactures a wide range of AC-DC and DC-DC power products for Medical, Industrial, Com-munications and Test &
Measurement applications worldwide. For more information, call TDK-Lambda directly at 619-575-4400 or visit the website at: www.us.tdk-lambda.com/lp
Mel Berman, Product Marketing Manager
TDK-Lambda Americas Inc.
3055 Del Sol Blvd.
San Diego, CA 92154
- ### -