TDK Corporation announces the introduction of the TDK-Lambda 1U Full-Rack 2.7kW AC/DC Programmable Power Supply Series. Adding to the already released 1.7kW, 5kW, 10kW and 15kW platforms, the 2.7kW platform provides the user with a choice of ten different models, ranging from 10V-265A to 600V-4.5A, that have advanced performance and functionality well suited for Design, Test and Measurement within the Laboratory/R&D environment and address broad market segments including Automotive, Aerospace, Semiconductor, Industrial and Renewable/Alternative Energy.
Built into a lightweight 1U high, 19” (483mm) wide rack-mountable chassis, the 2.7kW Power Supply Series offers five embedded front panel setup menus that offer user-selectable functions including Internal Resistance simulation, Slew-Rate control of Output voltage/current, Constant-Power limit and Arbitrary waveform generation.
All models have three AC Input options which include a single-phase 230VAC Input (with 0.99 PF), a three-phase 208VAC Input (with 0.94 PF) or a wide-range 400VAC/480VAC Input (with 0.94 PF), and have conversion efficiencies up to 90.5% with cooling fan speed control (for reduced audible noise and extended life).
Standard safety features include user-selectable Safe-Start/Auto Re-Start and Last Setting Memory along with other built-in protective functions including Output Over-Voltage Protection (OVP), Output Under-Voltage Limit (UVL), Output Under-Voltage Protection (UVP), Fold-Back protection (FOLD) for CV or CC mode, Output Over-Current Limit (OCL) and Over-Temperature protection (OTP).
A new Advanced Parallel Master/Slave system allows for up to four units to be connected in parallel with Auto-Configuring technology and provides dynamic response and Output voltage ripple/noise characteristics comparable to that of a single unit.
All model functions can be programmed locally via the menu-driven front panel display or remotely using software instrument drivers with any one of the three built-in standard Digital interfaces (LAN (LXI 1.5), USB (2.0) and RS-232/RS-485). Other programming interfaces include the built-in standard Isolated Analog Program/Monitor/Control Interface, the optional IEEE (IEEE 488.2) and ModBUS-TCP Digital interfaces.
The 2.7kW Power Supply Series carries a five (5) year warranty, has Safety certifications to IEC/EN/UL/cUL 60950-1 and has CE marking in accordance with the Low Voltage, EMC (IEC/EN61204-3; industrial environment) and RoHS Directives.
For more information about the TDK-Lambda 1U Full-Rack 2.7kW AC/DC Programmable Power Supply Series, please visit the TDK-Lambda Americas Programmable & High Voltage website at https://www.us.tdk-lambda.com/hp/product_html/genplus1u2_7.htm and fill out an online Information Request at http://www.us.tdk-lambda.com/hp/form/request_genplus2-7.htm.
Also available is the low-cost general purpose 1U Full-Rack Genesys™ 2.4kW DC Programmable Power Supply Series along with a wide range of other TDK-Lambda Americas Programmable & High Voltage power supplies which can be viewed from the Programmable & High Voltage website at http://www.us.tdk-lambda.com/hp.